05-03-2018, 01:50 AM
1, anti-fouling: Every two or three months, you can make a floor wax on the floor. Prior to waxing, dirt should be dusted, and then a waxing, clean, lint-free rag should be used to wax,Wood Plastic Composite Decking For Sale starting from one edge of the wooden floor, followed by circular rubbing on the surface of the board. After wiping it evenly, wipe it again with the original wiper (no more wax) from the edge of the original wipe. Waxed floor surfaces are not only clean and fresh,build composite garden box part but also can protect the paint film and delay aging. In the maintenance of solid wood flooring, we must pay attention to keep the floor dry, clean, do not wet with water or scrub with alkaline water, soap and water, so as not to undermine the brightness of the paint. If it is dirty or dirty, wipe it with a dry cloth. Waxing once a month is also necessary, but wipe off the water vapor and dirt before waxing.
2. Lacquer: After using for three or five years, the same kind of paint on the original paint floor can be used to repaint the floor again. In addition to dust removal before the paint, but also apply a little bit of water sanding paper,list of floor tiles companies warm water spotting, the board surface lightly polished again, grinding off the residual oil on it, and grinding away the last small lacquer paint. After polishing, wipe it clean with a clean rag to apply paint. The floor thus painted will be smoother, cleaner and more lustrous.
3, heat protection: If you encounter heating leaking, there is water on the wood floor, must be promptly clean, can not be directly exposed to the sun or baking with electric oven,anti-aging outdoor decks cost so as not to dry too fast, the floor cracking. Long-term use of solid wood flooring should not be covered with plastic sheets or newspapers, because over time, the film will be sticky and lose luster. At the same time, avoid hot water pots, rice cookers and other objects directly on the floor surface, so as not to burn bad paint film.
4, scrub: In the daily cleaning, you can first use a vacuum cleaner to remove, and then use a soft cloth dipped in a special detergent or soap tablets to clean. For a large area of cleaning, use a sprayer or a rotary cleaner. For natural lacquer solid wood flooring,prefab fence components water does not have any benefit to it. When cleaning, it is necessary to minimize excess moisture. When scrubbing, be sure to wring out the rag. Oil wax wood flooring to remove the black rubber wear marks and other marks that can not be removed with water can be removed with a soft cloth,building a deck in the tropics low concentration of alcohol or a little white wine.
Solid wood floor waxing Note: To prevent detergent accumulation in the groove, soak the detergent rag to try to wring dry. Floor wax scavengers can cause floor stains and bulging and must not be used. Wipe with a wrung rag.
Wipe with a well-wrung rag. The surface of the floor, especially the grooved part, should be carefully wiped and there should be no residual detergent. If there is residual detergent and moisture,synthetic teak flooring for boats the surface will be whitened and bulging. All must pay attention to after fully drying: if not fully dried, the floor wax will not closely adhere to the floor surface, affect the appearance, resulting in whitening phenomenon. Use wax at least three times, rubbing the floor with a lint-free cloth or waxer each time to allow the wax to penetrate the wood. To get shiny results,deckorators decking composite reviews use a soft cloth to gently polish each wax. After each fight, after drying, polish the appearance with a fine sandpaper, clean it, and make a second pass.
2. Lacquer: After using for three or five years, the same kind of paint on the original paint floor can be used to repaint the floor again. In addition to dust removal before the paint, but also apply a little bit of water sanding paper,list of floor tiles companies warm water spotting, the board surface lightly polished again, grinding off the residual oil on it, and grinding away the last small lacquer paint. After polishing, wipe it clean with a clean rag to apply paint. The floor thus painted will be smoother, cleaner and more lustrous.
3, heat protection: If you encounter heating leaking, there is water on the wood floor, must be promptly clean, can not be directly exposed to the sun or baking with electric oven,anti-aging outdoor decks cost so as not to dry too fast, the floor cracking. Long-term use of solid wood flooring should not be covered with plastic sheets or newspapers, because over time, the film will be sticky and lose luster. At the same time, avoid hot water pots, rice cookers and other objects directly on the floor surface, so as not to burn bad paint film.
4, scrub: In the daily cleaning, you can first use a vacuum cleaner to remove, and then use a soft cloth dipped in a special detergent or soap tablets to clean. For a large area of cleaning, use a sprayer or a rotary cleaner. For natural lacquer solid wood flooring,prefab fence components water does not have any benefit to it. When cleaning, it is necessary to minimize excess moisture. When scrubbing, be sure to wring out the rag. Oil wax wood flooring to remove the black rubber wear marks and other marks that can not be removed with water can be removed with a soft cloth,building a deck in the tropics low concentration of alcohol or a little white wine.
Solid wood floor waxing Note: To prevent detergent accumulation in the groove, soak the detergent rag to try to wring dry. Floor wax scavengers can cause floor stains and bulging and must not be used. Wipe with a wrung rag.
Wipe with a well-wrung rag. The surface of the floor, especially the grooved part, should be carefully wiped and there should be no residual detergent. If there is residual detergent and moisture,synthetic teak flooring for boats the surface will be whitened and bulging. All must pay attention to after fully drying: if not fully dried, the floor wax will not closely adhere to the floor surface, affect the appearance, resulting in whitening phenomenon. Use wax at least three times, rubbing the floor with a lint-free cloth or waxer each time to allow the wax to penetrate the wood. To get shiny results,deckorators decking composite reviews use a soft cloth to gently polish each wax. After each fight, after drying, polish the appearance with a fine sandpaper, clean it, and make a second pass.
