06-06-2018, 12:50 AM
1, on the arch dispute
Due to the production of raw materials, the floor will inevitably be deformed after being exposed to moisture. Therefore, there is a coefficient of dry and wet expansion in the national standards of the floor. However,wood polymer composite sheet canada the solid wood flooring reflects the dryness of the floor, and the composite flooring has the curvature strength. There is a reason why the solid wood floor arching is the degree of dryness of the keel. If the quality of the keel is bad, it will affect the use of the solid wood floor. Therefore, the solid wood floor arching may not be the reason of the floor. The choice of accessories is also very important. On the one hand,12x16 composite decking kits the arching of the composite floor is a problem of the floor substrate. On the one hand, it causes the accumulation of stagnant water during the daily maintenance. If there is no artificial factor, it is the quality of the floor.
As for the problem of expansion joints, no matter what kind of floor is needed,extending floor joist for a deck it is an industry-wide provision. Even if customers do not request to stay, they must explain to the customer why they must stay. I think no one knows that no expansion joints will appear. What consequences do not require expansion joints. Why the flooring industry mostly uses one-year free maintenance after-sales service,wood deck cost per square feet because the floor after the paving experience after four seasons of climate change in spring, summer, autumn and winter, there will be few problems.
2, on the wearable dispute
Personal feeling that solid wood flooring should not be too much propaganda on the wear, if wear or strengthen the floor. Because the general solid wood floor surface is uv paint, piano paint and other leaching paint,wood composite decking durable and uv paint which is the most wear-resistant, solid wood flooring is also almost solid wood flooring but the surface is also attached to aluminum oxide (multi-layer solid wood composite more), The laminate floor surface is wear-resistant aluminum oxide layer, the national standard for 6,000 rpm but to more than 20,000 rpm is a bit extravagant. Moreover, domestic laminate flooring does not need to be too high, and generally high-wear-resistant flooring is installed in commercial or sports venues.
The problem of floor cracking is a problem that needs to be paid attention to in strengthening the laminate flooring, but it does not affect the performance of the laminate flooring itself. Why it is prone to this problem is because of the characteristics of the reinforced aluminum oxide flooring surface,vinyl covered luan plywood flooring although Wearable but relatively crisp texture, a slight bump will be off the corner, this is only for a single floor. The floor is completely paved, because the height difference is almost non-existent, so after the installation, there will be no falling corners, but avoid using sharp things to pick up the floor surface. This is different from the two concepts of wear resistance of the floor, so it is not very scientific to say that wear is conditional on the edge of the floor. Not to mention the iron cloth qigong as a floor, although this idea is very good, but it is too exaggerated.
3, on the maintenance of the dispute
The maintenance of solid wood floor is more troublesome, high-grade flooring of course need careful care, and now some solid wood flooring prices are more expensive than solid wood flooring, of course, also need to spend some more care, strengthen the floor also need Maintenance, but it is still relatively easy,pvc plywood 4x8 sheets usually with no drip mop on it.
4, on the waterproof dispute
This point I do not want to do too much explanation, after the floor meets water, it will certainly be deformed, some of the floor may be restored to original,composite chaise lounge chairs but most of the floor will be deformed. You can soak a small piece of water in the floor. Heat cooking will rarely distort, but what if the floor is taken out? What about a standard length of floor? With a unit area spliced floor it? Who can guarantee not to deform?
Due to the production of raw materials, the floor will inevitably be deformed after being exposed to moisture. Therefore, there is a coefficient of dry and wet expansion in the national standards of the floor. However,wood polymer composite sheet canada the solid wood flooring reflects the dryness of the floor, and the composite flooring has the curvature strength. There is a reason why the solid wood floor arching is the degree of dryness of the keel. If the quality of the keel is bad, it will affect the use of the solid wood floor. Therefore, the solid wood floor arching may not be the reason of the floor. The choice of accessories is also very important. On the one hand,12x16 composite decking kits the arching of the composite floor is a problem of the floor substrate. On the one hand, it causes the accumulation of stagnant water during the daily maintenance. If there is no artificial factor, it is the quality of the floor.
As for the problem of expansion joints, no matter what kind of floor is needed,extending floor joist for a deck it is an industry-wide provision. Even if customers do not request to stay, they must explain to the customer why they must stay. I think no one knows that no expansion joints will appear. What consequences do not require expansion joints. Why the flooring industry mostly uses one-year free maintenance after-sales service,wood deck cost per square feet because the floor after the paving experience after four seasons of climate change in spring, summer, autumn and winter, there will be few problems.
2, on the wearable dispute
Personal feeling that solid wood flooring should not be too much propaganda on the wear, if wear or strengthen the floor. Because the general solid wood floor surface is uv paint, piano paint and other leaching paint,wood composite decking durable and uv paint which is the most wear-resistant, solid wood flooring is also almost solid wood flooring but the surface is also attached to aluminum oxide (multi-layer solid wood composite more), The laminate floor surface is wear-resistant aluminum oxide layer, the national standard for 6,000 rpm but to more than 20,000 rpm is a bit extravagant. Moreover, domestic laminate flooring does not need to be too high, and generally high-wear-resistant flooring is installed in commercial or sports venues.
The problem of floor cracking is a problem that needs to be paid attention to in strengthening the laminate flooring, but it does not affect the performance of the laminate flooring itself. Why it is prone to this problem is because of the characteristics of the reinforced aluminum oxide flooring surface,vinyl covered luan plywood flooring although Wearable but relatively crisp texture, a slight bump will be off the corner, this is only for a single floor. The floor is completely paved, because the height difference is almost non-existent, so after the installation, there will be no falling corners, but avoid using sharp things to pick up the floor surface. This is different from the two concepts of wear resistance of the floor, so it is not very scientific to say that wear is conditional on the edge of the floor. Not to mention the iron cloth qigong as a floor, although this idea is very good, but it is too exaggerated.
3, on the maintenance of the dispute
The maintenance of solid wood floor is more troublesome, high-grade flooring of course need careful care, and now some solid wood flooring prices are more expensive than solid wood flooring, of course, also need to spend some more care, strengthen the floor also need Maintenance, but it is still relatively easy,pvc plywood 4x8 sheets usually with no drip mop on it.
4, on the waterproof dispute
This point I do not want to do too much explanation, after the floor meets water, it will certainly be deformed, some of the floor may be restored to original,composite chaise lounge chairs but most of the floor will be deformed. You can soak a small piece of water in the floor. Heat cooking will rarely distort, but what if the floor is taken out? What about a standard length of floor? With a unit area spliced floor it? Who can guarantee not to deform?