06-22-2021, 05:23 PM
International Criteria For Mechanical Properties And Industrial Substances B
NOTE b: Factory such as circumstances offer shelter from lead weathering and grime, prevent undue movement of the joints during curing of the glue and provide temperature and relative humidity requirements and control as in mill production environment. This document also covers glued-in sticks in surface treated wood. It does not cover glued-in sticks in altered and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood, polymer impregnated timber and preservative treated wood. The joints are meant for load-bearing wood structures in service classes 1 and 2 according to EN 1995-1-1 which are loaded mostly static or quasi static according to EN 1990 and EN 1991-1-1. The joints are intended for load-bearing wood structures that aren't exposed to a prolonged exposure to temperatures over 60 °C. A thorough determination of the areas in which this standard can be used will permit you to know whether it matches the technical base of your company. In case you have some questions regarding defining the gear and procedures described in this record, you can speak to a company of specialists within the field of selection of international standards, who will offer guidance and select the correct standard.
Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
We've already mentioned more than once the importance of test methods for building a productively functioning system. This phase is performed in virtually every region of production activity. Another important standard governing test methods and the requirements for them is EN 17418: 2021. This document specifies test methods and requirements for two-component epoxy and polyurethane adhesives for on-site repair of cracks in wood structures made from strength graded structural timber with rectangular cross-section, structural finger-jointed wood, glued solid timber and glued laminated wood made of softwood species by injection of this repair adhesive with glue line thicknesses up to 2 mm.
The adhesive may also be used to wreak havoc in the region of joints made from screws, nails, dowel-type fasteners and dowels together with threads. The glue may also be used to fill gaps between the faces of structural elements. This document addresses exclusively adhesives which satisfy the requirements based on Clause 8. This document also covers the repair of surface treated wood. The glue is intended for the treatment of load bearing timber structures not subjected to temperatures more than 60 °C within a more extended time in support courses 1 and 2 according to EN 1995-1-1 that are loaded mostly static or non-fatigue quasi static, watch EN 1990 and EN 1991-1-1.
If you are thinking about buying this standard, or comparable standards of a related business, we advise that you follow the link to the website and get accustomed to the entire list of available documents. Perhaps this is where you'll see criteria that will go a long way towards structuring your organization's system.
Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
In today's world, the usage of plastic is considerably minimized, as it negatively impacts environmental aspects. Nevertheless, it is for this reason that an increasing number of regulatory functions are being made to govern activities that come into contact with this material, one of which will be EN ISO 6721-3: 2021. This document specifies a bending-vibration method depending upon resonance curves for determining the flexural complicated modulus of homogeneous plastics along with the damping properties of laminated plastics meant for acoustic insulating material, such as systems comprising a metallic sheet coated with a damping plastic layer, or sandwich systems consisting of 2 sheet-metal layers using a intermediate plastic coating. For many functions, it's useful to ascertain these properties as a function of temperature and frequency.
If your activities directly or indirectly come into contact with the mentioned types of materials and equipment, we strongly recommend that you have this standard accessible to be able to be sure your organization's system operates in accordance with the latest needs of international worldwide markets. That is what's going to keep you in the forefront of your business.
The importance of getting global standards in a business
At first glance, the presence of global standards may seem as a requirement only for local companies and manufacturers. Nonetheless, the vector of development of local markets is moving increasingly more towards globalization, which is the reason by preparing the earth in advance for entering the international level, it is likely to significantly strengthen the position of an enterprise's competitiveness. That's why we are always happy to assist you in choosing international documents which are acceptable for your company or organization.
NOTE b: Factory such as circumstances offer shelter from lead weathering and grime, prevent undue movement of the joints during curing of the glue and provide temperature and relative humidity requirements and control as in mill production environment. This document also covers glued-in sticks in surface treated wood. It does not cover glued-in sticks in altered and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood, polymer impregnated timber and preservative treated wood. The joints are meant for load-bearing wood structures in service classes 1 and 2 according to EN 1995-1-1 which are loaded mostly static or quasi static according to EN 1990 and EN 1991-1-1. The joints are intended for load-bearing wood structures that aren't exposed to a prolonged exposure to temperatures over 60 °C. A thorough determination of the areas in which this standard can be used will permit you to know whether it matches the technical base of your company. In case you have some questions regarding defining the gear and procedures described in this record, you can speak to a company of specialists within the field of selection of international standards, who will offer guidance and select the correct standard.
Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
We've already mentioned more than once the importance of test methods for building a productively functioning system. This phase is performed in virtually every region of production activity. Another important standard governing test methods and the requirements for them is EN 17418: 2021. This document specifies test methods and requirements for two-component epoxy and polyurethane adhesives for on-site repair of cracks in wood structures made from strength graded structural timber with rectangular cross-section, structural finger-jointed wood, glued solid timber and glued laminated wood made of softwood species by injection of this repair adhesive with glue line thicknesses up to 2 mm.
The adhesive may also be used to wreak havoc in the region of joints made from screws, nails, dowel-type fasteners and dowels together with threads. The glue may also be used to fill gaps between the faces of structural elements. This document addresses exclusively adhesives which satisfy the requirements based on Clause 8. This document also covers the repair of surface treated wood. The glue is intended for the treatment of load bearing timber structures not subjected to temperatures more than 60 °C within a more extended time in support courses 1 and 2 according to EN 1995-1-1 that are loaded mostly static or non-fatigue quasi static, watch EN 1990 and EN 1991-1-1.
If you are thinking about buying this standard, or comparable standards of a related business, we advise that you follow the link to the website and get accustomed to the entire list of available documents. Perhaps this is where you'll see criteria that will go a long way towards structuring your organization's system.
Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
In today's world, the usage of plastic is considerably minimized, as it negatively impacts environmental aspects. Nevertheless, it is for this reason that an increasing number of regulatory functions are being made to govern activities that come into contact with this material, one of which will be EN ISO 6721-3: 2021. This document specifies a bending-vibration method depending upon resonance curves for determining the flexural complicated modulus of homogeneous plastics along with the damping properties of laminated plastics meant for acoustic insulating material, such as systems comprising a metallic sheet coated with a damping plastic layer, or sandwich systems consisting of 2 sheet-metal layers using a intermediate plastic coating. For many functions, it's useful to ascertain these properties as a function of temperature and frequency.
If your activities directly or indirectly come into contact with the mentioned types of materials and equipment, we strongly recommend that you have this standard accessible to be able to be sure your organization's system operates in accordance with the latest needs of international worldwide markets. That is what's going to keep you in the forefront of your business.
The importance of getting global standards in a business
At first glance, the presence of global standards may seem as a requirement only for local companies and manufacturers. Nonetheless, the vector of development of local markets is moving increasingly more towards globalization, which is the reason by preparing the earth in advance for entering the international level, it is likely to significantly strengthen the position of an enterprise's competitiveness. That's why we are always happy to assist you in choosing international documents which are acceptable for your company or organization.