07-20-2020, 07:05 AM
[font=宋体]mould[/font] manufacturing technology has developed very quickly in our lives. It has become an important part of modern manufacturing technology, but some people do not know what [font=宋体]mould[/font] manufacturing is because they are less exposed to this aspect. The characteristics of manufacturing are introduced to let people better understand the [font=宋体]mould[/font] manufacturing.
To know what [font=宋体]mould[/font] manufacturing is, we must first understand its production characteristics. The [font=宋体]mould[/font] is a special process equipment with a very long life. It exhibits the following characteristics in the production process. When it is produced, Only a certain shape can be produced, and the size and precision of the [font=宋体]mould[/font] should be fixed, so when it is produced, they are all produced in a single piece, and a variety of products can be produced. When the [font=宋体]mould[/font] is produced, the required production cycle is very short. As the market competition becomes more and more fierce, the process requirements for [font=宋体]mould[/font] manufacturing are now higher and higher, and the production cycle is required to be shorter and shorter. When manufacturing, aspects such as production management, design, and process should be able to adapt to objective requirements.
If you need to use multiple pairs of [font=宋体]mould[/font]s to complete the processing of a part, then each pair of [font=宋体]mould[/font]s should be involved and influenced by each other. When producing [font=宋体]mould[/font]s, you need to go through trial punching and testing after [font=宋体]mould[/font] assembly Pressure treatment, after test punching and pressure test, can determine whether the [font=宋体]mould[/font] manufacturing is qualified, and some parts need to be repaired in the case of unqualified, so when manufacturing the [font=宋体]mould[/font], the production schedule must be A certain amount of free time should be left to allow time for trial.
What is [font=宋体]mould[/font] manufacturing? This may be a problem that many people are more concerned about. The current [font=宋体]mould[/font] manufacturing is also evolving. It is gradually developing in the direction of mechanization, precision, and automation. Now the parts of the product have very high requirements on the [font=宋体]mould[/font]. The precision is relatively high, the life is relatively long, and the efficiency of the [font=宋体]mould[/font] is relatively high when it is used, so now there are higher requirements for [font=宋体]mould[/font] manufacturing. The precision of the machine tools that require [font=宋体]mould[/font] processing is also very high, and the processing technology The conditions, measurement methods and methods are also getting higher and higher, so the current [font=宋体]mould[/font] manufacturing is gradually developing towards high-tech intensive.
In the manufacture of [font=宋体]mould[/font]s, the [font=宋体]mould[/font] machine tools used are generally universal universal machine tools, measuring tools and some instruments are also common, so that you can avoid using some other second-class tools. In order to ensure that the precision of the processing is relatively high when manufacturing the [font=宋体]mould[/font], and reduce the difficulty in the processing process, the [font=宋体]mould[/font] is generally designed and manufactured using the "real matching method" and "same boring method" to Completing the relevant operations, so that when the [font=宋体]mould[/font] is manufactured, the interchangeability of parts is greatly reduced. And when manufacturing [font=宋体]mould[/font]s, all processes should be relatively concentrated, so that the quality and progress of [font=宋体]mould[/font] manufacturing can be guaranteed, and the turnaround time of the processes can be reduced, making management simplified.
As people pay more and more attention to health, the market demand for medical [font=宋体]moulds is growing. With its superb technology, Shengjiu Medical [font=宋体]mould[/font] makes these uses of Medical Mould more. Main production and supply: medical [font=宋体]mould[/font] products such as syringe [font=宋体]mould[/font]s, safety needle [font=宋体]mould[/font]s, oxygen mask [font=宋体]mould[/font]s, needle-free injection takeovers, Vaginal Speculum Mould and so on. Safe, fast and simple needle-free injection site products are suitable for medical Needleless Injection Site applications. We have strict quality control throughout the production process of our products, making our products a safe choice for everyone. Welcome to consult and order: https://www.medicalmould.net/medical-mould/[/font]
To know what [font=宋体]mould[/font] manufacturing is, we must first understand its production characteristics. The [font=宋体]mould[/font] is a special process equipment with a very long life. It exhibits the following characteristics in the production process. When it is produced, Only a certain shape can be produced, and the size and precision of the [font=宋体]mould[/font] should be fixed, so when it is produced, they are all produced in a single piece, and a variety of products can be produced. When the [font=宋体]mould[/font] is produced, the required production cycle is very short. As the market competition becomes more and more fierce, the process requirements for [font=宋体]mould[/font] manufacturing are now higher and higher, and the production cycle is required to be shorter and shorter. When manufacturing, aspects such as production management, design, and process should be able to adapt to objective requirements.
If you need to use multiple pairs of [font=宋体]mould[/font]s to complete the processing of a part, then each pair of [font=宋体]mould[/font]s should be involved and influenced by each other. When producing [font=宋体]mould[/font]s, you need to go through trial punching and testing after [font=宋体]mould[/font] assembly Pressure treatment, after test punching and pressure test, can determine whether the [font=宋体]mould[/font] manufacturing is qualified, and some parts need to be repaired in the case of unqualified, so when manufacturing the [font=宋体]mould[/font], the production schedule must be A certain amount of free time should be left to allow time for trial.
What is [font=宋体]mould[/font] manufacturing? This may be a problem that many people are more concerned about. The current [font=宋体]mould[/font] manufacturing is also evolving. It is gradually developing in the direction of mechanization, precision, and automation. Now the parts of the product have very high requirements on the [font=宋体]mould[/font]. The precision is relatively high, the life is relatively long, and the efficiency of the [font=宋体]mould[/font] is relatively high when it is used, so now there are higher requirements for [font=宋体]mould[/font] manufacturing. The precision of the machine tools that require [font=宋体]mould[/font] processing is also very high, and the processing technology The conditions, measurement methods and methods are also getting higher and higher, so the current [font=宋体]mould[/font] manufacturing is gradually developing towards high-tech intensive.
In the manufacture of [font=宋体]mould[/font]s, the [font=宋体]mould[/font] machine tools used are generally universal universal machine tools, measuring tools and some instruments are also common, so that you can avoid using some other second-class tools. In order to ensure that the precision of the processing is relatively high when manufacturing the [font=宋体]mould[/font], and reduce the difficulty in the processing process, the [font=宋体]mould[/font] is generally designed and manufactured using the "real matching method" and "same boring method" to Completing the relevant operations, so that when the [font=宋体]mould[/font] is manufactured, the interchangeability of parts is greatly reduced. And when manufacturing [font=宋体]mould[/font]s, all processes should be relatively concentrated, so that the quality and progress of [font=宋体]mould[/font] manufacturing can be guaranteed, and the turnaround time of the processes can be reduced, making management simplified.
As people pay more and more attention to health, the market demand for medical [font=宋体]moulds is growing. With its superb technology, Shengjiu Medical [font=宋体]mould[/font] makes these uses of Medical Mould more. Main production and supply: medical [font=宋体]mould[/font] products such as syringe [font=宋体]mould[/font]s, safety needle [font=宋体]mould[/font]s, oxygen mask [font=宋体]mould[/font]s, needle-free injection takeovers, Vaginal Speculum Mould and so on. Safe, fast and simple needle-free injection site products are suitable for medical Needleless Injection Site applications. We have strict quality control throughout the production process of our products, making our products a safe choice for everyone. Welcome to consult and order: https://www.medicalmould.net/medical-mould/[/font]
